Call for a FREE Quote Now!

connect gas to property

All Brisbane connect gas to property services

LICENCED PLUMBERS

GUARANTEED QUALITY SERVICE

EXPERTS AT ALL PLUMBING ISSUES

CALL FOR A FREE QUOTE

Get a FREE Quote Now 

What Our Clients Say

The boys were fantastic. We had an emergency on a Saturday with a leak under our kitchen sink. There were quick to arrive, getting to us 20 minutes after we called, identified the issue and our leak was fixed in no time. Very professional and a very happy customer. Thank you so much!

 

 
5/5

Sarah

Highly recommend this company. Friendly, professional and extremely responsive. Adjusted their schedule to help me out and sent plumber within the hour. The attending plumber was fantastic too and solved a very difficult water leak issue promptly and efficiently. Plus the cost was very reasonable indeed.

5/5

George

The Boys recently installed and connected plumbing to our new fridge and clothes dryer and relocated an outdoor tap at our home in Brisbane.

They responded quickly to our call for help and arrived on time. He was polite and easy to communicate with. He explained the services, products being used and also gave us some great plumbing advice to avoid water damage problems in future.

5/5

Michelle

Brisbane connects gas to property Services

The easiest way to keep your property cool in the summer is with a gas central heating system. The air that blows into your property from outside is normally very hot and humid, which means natural gas central heating systems are great at keeping indoor temperatures comfortable. However, there are some tricky scenarios where a natural gas central heating system isn’t the ideal solution. If you have a lot of open space around your home, or if you don’t want to pay a significant monthly gas bill, consider connecting your property’s gas cylinder to an electric radiator valve. This will allow any gassy atmosphere in one room to escape via another wall instead of through your home’s main entrance. If you’re looking to connect a new pipe or retrofit an existing system, check out these top-notch Brisbane plumbing and HVAC companies.

Leak Detection Specialists

We Will Fix All Your Problems

If your goal is to connect your gas line to your home’s main pipe, you need to make sure you have access to a hydridex connection. This is a 24-inch natural gas pipe that runs under your property and is usually concealed by your home’s foundation or side wall. At the connection, connect your natural gas line to the main pipe using a compression fitting. Run the compression fitting to the utility’s main distribution relay box and turn the box’s keystone to activate the gas line. There are a number of ways to connect gas to your property in Brisbane – Nlk-plumbing. You can run the line to the street or to a private connection. If you run the line to the street, check with the local utility department to see if you need to change your gas bill. Connecting the line to a private connection is known as a direct connection, and is often more expensive.

Refer a Friend

and recieve 15% off your next future quote

Use This Code

"Take20offf"
to get 20% off

Senior Citizen Discount

Pension card for
20% Off

Benefits of connecting gas to property NLK-Plumbing Brisbane

The easiest way to keep your property cool in the summer is with a gas central heating system. The air that blows into your property from outside is normally very hot and humid, which means natural gas central heating systems are great at keeping indoor temperatures comfortable. However, there are some tricky scenarios where a natural gas central heating system isn’t the ideal solution. If you have a lot of open space around your home, or if you don’t want to pay a significant monthly gas bill, consider connecting your property’s gas cylinder to an electric radiator valve. This will allow any gassy atmosphere in one room to escape via another wall instead of through your home’s main entrance. If you’re looking to connect a new pipe or retrofit an existing system, check out these top-notch Brisbane plumbing and HVAC companies:
In certain situations, using a natural gas central heating system is not the best choice. You may wish to connect your property’s gas line to a city utility and let the heat out. This is usually done to reduce your carbon footprint and to avoid the installation of expensive and inefficient solar panels. However, if you’re not connected to a city utility when you’re in the middle of nowhere, your natural gas system is essential and you’re likely to experience high levels of carbon monoxide and other potentially harmful gas emissions. Connecting the gas main to an existing electricity distribution panel is the solution if you want to limit your carbon footprint.
In some areas of the country, such as Western Australia, there are restrictions on the amount of natural gas that can be used in residential settings. In these areas, you must use a natural gas central heating system. However, if you’re lucky enough to live in a state with no such restrictions, you can connect your property’s natural gas line to the gas main and let the heat out. There are no carbon emissions associated with this solution.
The process for connecting gas to a property in Brisbane – Nlk-plumbing relies on you having access to a natural gas line. If you don’t have a natural gas line running to your property, check out these top-notch Brisbane plumbing and HVAC companies:
If your property is served by a natural gas main, you can simply connect the gas line to the main. If you don’t have access to a main, you can connect to a gas connection. These are usually hard-to-spot gas pipes that run under your property and connect to the main. If your home is near a city, you can simply use the city utility’s connection. However, the best approach is to run the connection to an existing gas main. It will increase the odds that any carbon emissions will be limited. Connecting an existing gas main is a two-person job. The first person on the team opens the main, while the second person uses a special device to cut open the pipes. The cut has to be made in the ground, so the team can’t see what they’re doing. Make sure to check with your local utility department to make sure you don’t need a city connection and you can simply connect to a main.
If you’re not running a gas fireplace, the carbon monoxide emitted from a gas fireplace can reach toxic levels in a person’s home. The carbon monoxide leaks from the fireplace in two different directions. One of them is directly into your home, while the other comes out of the wall and door. The carbon monoxide protects you from an overdose, but if you’re in the room where the leak occurs, you could experience a dangerous buildup of carbon monoxide in your blood. You can protect yourself by using an electronic device or by going outside and turning on a carbon monoxide alarm. If you don’t have an alarm, you could be experiencing deadly levels of carbon monoxide every day in your home. Connecting a natural gas fireplace to an existing electric heater is an excellent way to protect yourself from carbon monoxide.
An underground pipe system is more consistent and reliable than a natural gas system. You won’t have to deal with fluctuating indoor temperatures, variable pipe length, and a high risk of water-damaged pipes. An underground pipe system also requires less maintenance. You won’t have to keep pipes filled with concrete or tiled drain pipes. Uphold groundwater is steadily flowing through the pipe system and creating a stable water flow. No more guesswork or delays with natural gas lines. You can connect your gas line to a city utility, and then connect to an existing sewage line or water main. This is a low-maintenance, low-carbon-footprint solution.
If you’re notifying the utility department that you’re adding a new gas line, you can connect directly to the new pipe. This is often the easiest and least expensive approach, but it does require you to go to the construction site and connect to the pipe there. If you choose this option, you should be certain that the area you’re working in is legal. Some areas require you to obtain a permit before you can dig a ditch or trench. Make sure to check with your local utility department to be certain.
If you’re only adding an extension or lateral line to an existing electric line, it’s easier to connect to the existing main. If you’re notifying the utility department that you’re adding a new electric line, you can simply connect to the new pipe. This is often the easiest and least expensive approach, but it does require you to go to the construction site and connect to the pipe there. If you choose this option, you should be certain that the area you’re working in is legal. Some areas require you to obtain a permit before you can dig a ditch or trench. Make sure to check with your local utility department to be certain.
As we mentioned above, natural gas is a clean and safe heating fuel. It’s also highly combustible, so when you connect gas to your property, you’re basically adding a second load to your home’s fire safety system. If the leaks from your new connection are big enough, you could also end up with an unhealthy gas atmosphere in your home. Any time you connect a new pipe or route a cold water line without first checking if it’s approved for the job, you’re opening yourself up to potential problems. Most notably, you might end up with a gas leak. If your system is old and has a lot of rusted pipe, a gas leak from your new connection could easily go unnoticed for years. That’s why it’s always a good idea to check for gas leaks with a gas detection system. These are usually found in commercial properties and are usually connected to a single gas line. Using an approved gas Leak Detector, you can quickly pinpoint any potential gas leaks and correct them before they become a problem.
When it comes to troubleshooting a gas leak, some things to keep in mind are: Is your system working as it should? Is there a main gas line running to your property? If not, try running an extension lead to a nearby property and see if it gives you a build-up of gas. If not, the leak may be in your system. Is there a main gas line running to your property? If not, try running an extension lead to a nearby property and see if it gives you a build-up of gas. If not, the leak may be in your system. Where does the leak occur? Is there a known problem zone where the leak maybe? For example, if your leak is coming from a water heater, the garage is a good bet. Is there a known problem zone where the leak maybe? For example, if your leak is coming from a water heater, the garage is a good bet. How much gas is leaking? Is the leak coming from a single point? If not, it might be easier to correct the leak and prevent further spread of gas into your home.
When it comes to connecting gas lines, there are actually a variety of options. We’ll go over the most common ones, but first, let’s get into what each type of gas line is used for. Gas line types in Brisbane include: Type I – A single line connected to a pressure main – A single line connected to a pressure main Type II – A double line connected to a pressure main – A double line connected to a pressure main Type III-A triple line connected to a pressure main – A triple line connected to a pressure main Type IV – A quadruple line connected to a pressure main – A quadruple line connected to a pressure main Type V – A quintuple line connected to a pressure main – A quintuple line connected to a pressure main Other – Any other type of connection, such as a pilot light to a valve

Why NLK Plumbing Brisbane Is Your Plumber Of Choice?

When we work on a job, we devote ourselves to give you the best results possible.

We always provide a professional service.

We try to limit the disruptions while we work and we treat your home with respect.

BOOK A FREE QUOTE ONLINE

Call NLK Plumbing Brisbane Now

Complete guaranteed plumbing service.
Book your plumbing and drainage services in three easy steps:
1. Get a Quote 2. Book an Appointment 3. Sit Back & Relax

2. Geta Free Quote

3. We Do Your Work

Contact us on 0405092779

We’re happy to offer a free quote with no obligations, so please feel free to tell us your Plumbing & Drainage issues!

We’ll do all your work

Get A Free Quote Now

Or call us directly on...

connect gas to property Questions

First, you’ll need to find out if your nearest LPG retailer offers to connect you to the supply network. If not, you’ll need to hire a contractor to dig a “gas line” throughout your yard. It could cost as much as $1500 for the job, and you should do it yourself if you’re handy with a wrench and a drill. Keep in mind that this is a very time-consuming and difficult task – you should only do this if you’re sure you want to keep your home warm even in the coldest weather. Once your LPG retailer has connected you to the supply network, it’ll take another month or so before you can start receiving natural gas. During this time, you’ll need to connect your existing hot water pipes to the new supply.
Once you’ve found an LPG retailer who’s willing to connect you, it’ll take some effort to get a gas connection. The retailer will usually want to make sure there’s a connection to the grid before they’ll give you the green light to plug the gas pipe into the main distribution network. The regulator will usually require you to sign a paper that states you’ll properly connect the pipe and disconnect it from the grid if the power goes out. If you’re willing to take the risk of not being able to connect the pipe to the grid, you can examine the “how to connect a gas pipe” section above for details on how to dig a gas line.
You’ll need to contact your local LPG retailer to find out if they offer to supply you with natural gas. If not, you’ll need to find another source for gas if you want to supply your property. You can find plenty of resources on how to source and use gas in our blog post “How do I get gas to my property?”
This is a potential safety concern, so you’ll need to make sure you have the correct authorities’ permission before running a gas pipe through another property. If you’re planning to run a gas pipe through another property, you need to examine the “how to run a gas pipe” section above for details on how to dig a gas line.
Most gas meters will display a range of information, including the average daily usage, the cost of the last bill, and the name and contact details of the gas supplier. You’ll need to get this information from the gas meter when you buy your gas bill, and you should have it in a readable format if you want to keep a record of your developments. Most gas meters also have a “read-in” feature that will allow you to see exactly how much gas is inside your home.
You can find out if you have natural gas in your area by getting yourself up-to-date with your gas bill. Open the envelope and look for the words “natural gas”. If you see it, then you probably have natural gas in your area. However, if you don’t see the word “natural” on your bill, then you don’t have natural gas. If you don’t know where to look, or if you’re not sure if your bill is an accurate representation of the situation, you can take matters into your own hands and buy a few gas samples to test for yourself. This will allow you to verify that you have the same amount of natural gas in your area as what’s on your bill, and will also allow you to compare the cost of different suppliers.
You can get mains gas to your house if you’re either on the coast or in a very rural area. Generally, you’ll need to get a towing license and arrange for a crew to dig a long (usually about 100 m) pipeline under your driveway or somewhere else public. If you’re in a remote area, you might consider hiring a local gasfitter to dig the line for you. One caution: make sure you know your local by-laws about towing and pipeline safety.
No, you don’t need to put up a masonry wall to connect a gas pipe. You can simply use a standard indoor wall such as those found in most homes. You’ll just need to make sure it’s at least 2mm thick, and preferably 5mm or harder. If you’re not sure where to find 2mm or 5mm bricks, check out this article for help sourcing some. Once you’ve got the wall piece, connect it to an outdoor electric valve.
Request a FREE Quote TODAY