Call for a FREE Quote Now!

10 Super-Simple Steps For Changing A Tap Washer

tap washer

Maintaining your home is an important task, but it can be daunting – especially when it comes to fixing things yourself.

Thankfully, fixing a tap washer is one of the simplest tasks you can do, and doesn’t require any special tools or skills. Follow these 10 easy steps and you’ll have the job done in no time!

What is a tap washer and how is it used?

A tap washer is a small, domed disc that sits under the handle of a tap. Its primary purpose is to provide a seal between the handle and the spindle, which prevents water from leaks.

As the name suggests, the tap washer is also responsible for turning the water on and off by opening and closing the valve.

If you have mixer taps then you can enjoy both hot and cold water whereas a plug hole only provides one temperature of water whether it be a hot water system or a cold one.

Over time, however, tap washers can become worn or damaged, which can cause leaks.With a little effort, you can keep your taps in good working condition for years to come.

What causes a tap washer to be damaged?

There are many causes of a damaged tap washer. The most common cause is simply wearing and tear.

Over time, the washer will become weaker and less able to seal properly, causing it to leak. Blocked drains are another common issue that can cause a tap to drip.

If your drain is blocked, water will build up behind the tap and eventually start to leak out.

Other causes include corrosion, mineral deposits, or foreign objects such as dirt or sand getting lodged in the washer. In some cases, the damage may be due to manufacturing defects.

How often should I replace the tap washers?

It’s a good idea to replace the tap washers every few years, or as soon as you notice a drip or a leaky tap.

This will help save water and keep your taps in good working condition.

NLK-Plumbing Brisbane blocked shower

What are the symptoms of a damaged tap washer?

The most common symptom of a damaged tap washer is a dripping tap. This can be annoying and wastes water.

You may also notice that the tap is harder to turn on or off, or that it leaks when turned on. In some cases, you may hear strange noises coming from the tap.

Do you have to turn the water off to change a washer in a tap?

If you need to replace the washer in a tap, you will need to turn the water off to the entire house. Please make sure you know how to turn the water off before beginning this project.

Once the water is off, you can remove the handle of the tap and access the washer. Take the old washer with you to a hardware store so that you can find an exact replacement.

To install the new washer, simply reverse the process of removing the old one. Turn the water back on slowly, and check for leaks before using the tap as usual.

10 easy steps to change a tap washer

A dripping tap is not only annoying, it’s also a waste of water. Luckily, changing a tap washer is a quick and easy job that anyone can do.

All you need is a few simple tools and you’ll replace tap washers in no time. Here’s how to do it:

  1. Turn off the water to the tap by using the tap handle. This is usually done by turning the knob on the water supply line under the sink clockwise until it stops.
  2. Place a towel or bucket under the sink to catch any drips.
  3. Use a wrench to remove the handle from the tap. In most cases, you will need to remove a decorative cap or button first, which can be pried off with a screwdriver. Once this is removed, you should see a small screw that holds on the handle; unscrew this and pull off the handle.
  4. Use a wrench to remove the packing nut from under the handle. This nut holds on the stem, which needs to be removed in order to get to the washer.
  5. Use a wrench to remove the stem from the tap. In most cases, you will need to hold on the body of the tap with another wrench while you do this, as it will want to turn as well.
  6. Remove the old washer from the stem and replace it with a new one. Make sure that the new washer is facing the same direction as the old one before putting everything back together.
  7. Reassemble the tap stem and packing nut and tighten with a wrench.
  8. Reattach the handle to the tap and screw on the decorative cap or button.
  9. Turn on the water supply to the tap and check for leaks. If there are any leaks, tighten the packing nut or handle a bit more.
  10. Enjoy your new tap washer

If you still have a problem understanding how to replace tap washers you can contact a plumbing system or a plumbing company and ask for their plumbing services.

How do you fix a leaking tap?

If your tap is leaking, there are a few things you can do to fix it. First, try tightening the packing nut.

This is the nut that holds the packing material in place. If this doesn’t stop the leak, you may need to replace the packing material.

You can also try replacing the washer. This is the part of the tap that actually comes into contact with the water. If neither of these solutions works, you may need to call a plumbing service.

What are the consequences of not changing a damaged tap washer?

If you have a hot water tap that is dripping, it is likely that the washer needs to be replaced. Ceramic tap washers are designed to last for many years, but they can become damaged over time.

If you do not replace a damaged tap washer, the leak will become worse and could eventually cause structural damage to your home. In addition, leaking taps can waste a lot of water, which is not good for the environment or your wallet!

Why does my tap still drips after changing the washer?

If your tap is still dripping after changing the washer, it is possible that the problem lies with the tap head or tap bonnet.

These parts can become worn over time and may need to be replaced. If you are not comfortable doing this yourself, you can always call a plumber to take care of the problem for you.

Conclusion

So there you have it – 10 simple steps for changing a tap washer. If you’re feeling confident, go ahead and give it a try yourself. But if you’d rather not take the risk, or if things get a bit too tricky, just call in the professionals at your local hardware store or plumber. 

Check out the toilet issue here.

Need

Plumbing Works?

SIMILAR

OTHER SERVICES

Request a FREE Quote TODAY